Submitted by Bryson66
(Oem and equivalents in RED)
Dyno Jet Part number | Dia. (In) | Dia. (MM) | Cobra Part Number |
---|---|---|---|
DJ 122 | 0.047 | 1.194 | |
DJ 126 | 0.049 | 1.247 | |
DJ 130 | 0.051 | 1.295 | |
DJ 132 | 0.052 | 1.320 | 135 K |
DJ 136 | 0.053 | 1.346 | |
DJ 140 | 0.054 | 1.371 | 140 K |
DJ 144 | 0.056 | 1.422 | |
0.057 | 1.447 | 145 K |
Slow Jet Info
Horizontal Jets(4) | ||||||||
---|---|---|---|---|---|---|---|---|
Part# (Honda) | Part# (Keihin) | Dia. (In) | Dia. (MM) | Dia. (In) | Dia. (MM) | Total Length (In) | Total Length (MM) | |
#50 | 99103-437-0500 | 0.019 | 0.483 | 0.026 | 0.66 | 0.928 | 23.57 | |
#52 | 99103-KCY-0520 | 0.020 | 0.508 | 0.026 | 0.66 | 1.101 | 27.965 | |
#55 | 99103-437-0550 | 0.021 | 0.533 | 0.026 | 0.66 | 0.928 | 23.57 |
Needle Info
Part Number | D1 | D2 | D3 | D4 | D5 | D6 | D7 | Dia. 8 | Dia. 9 | Dia. 10 | Dia. 11 | Seat Angle | Taper Angle | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dyno Jet | DNO 767 | 1.610 | 1.650 | 1.689 | 1.730 | 1.769 | 1.802 | 1.841 | 0.099 | 0.036 | 1.245 | 0.026 | 65° | 3° |
Honda OEM | 1.734 | 1.845 | 0.098 | 0.036 | 1.242 | 0.026 | 65° | 3° |
Spring Info
Part number | Wire Dia. | Length | Compression | |
---|---|---|---|---|
Dyno Jet | 0.040 | 4.155 | NA | |
Honda OEM | 0.035 | 6.625 | NA |
Notes
Dyno Jet Kit # 1007-0090 used. 04-06 Honda Aero specific.
All pin gages used were in standard inches. (No metric available.)
Pin gage step increment: .001 in.
Pin gages precision: ±.0005 in.
Conversions were performed using Google conversion tool.
Needle information collected with optical comparator.
Precision: ±.0002 in.
All measurements rounded to closest .001
Replacement Mixture screw part number: 16016-MAH-670
This website and it's contents are not affiliated with with Honda Motor Company, or any other group or organization. Performing the modifications listed within the website is done at your own risk. Developed and hosted by McLauthlin Technologies, LLC. Send questions, comments, or additions to