Submitted by Terry Briggs
Rick’s driver’s seat mod was very detailed but I choose to buy one off of Ebay for $43.00 from backrestempire and install it but the bolt issue happened to me also.
Notice the red Loctite? What the heck was Honda thinking? Anyways, I decide to try something a little bit different. I went to Home Depot and bought these bolts
I installed them through the fastener like this
And put some JB Weld around the top like Rick
And inserted the fasteners to the holes and ended up with this
Hint, put some Scotch Tape around the threads before inserting into the holes to keep the JB Weld off of the threads or you could end up with the original problem only worse.
This website and it's contents are not affiliated with with Honda Motor Company, or any other group or organization. Performing the modifications listed within the website is done at your own risk. Developed and hosted by McLauthlin Technologies, LLC. Send questions, comments, or additions to